Skip to main content
contact
cart
our twitterour facebook page
Sponsored forums

1993 - 1996 Camaro Automatic Transmission Ashtray Switchplate --
Price:
$61.99
 
Details:

You are looking at a custom made switch panel for your ashtray area in your 1993 - 1996 Camaro with an automatic transmission.  This is made from lasercut, black acrylic, and comes complete with the switches.

You are allowed to choose how many switches you would like (between 2 - 6), what type of switch you want (On / Off rocker switch, , momentary rocker switch, or a cutout/bottle opener switch) and the color of the LEDs in the rocker switches (amber, red, green - applicable only in On / Off switches).

We also give you the option of typing in custom labels.  For example, you may want a fan switch, so when prompted below, you would type in "Fan".  We will also allow you to choose the color of the lettering .  Here's the cool part - We can cut the lettering into the panel, but leave them uncolored.  This will allow you to place LEDs behind the lettering and make them backlit so you can read them in the dark.  That is completely up to you.

NOTICE: Up to 4 switches can fit without modification the the console.  The image pictured has 6 switches; 4 on the left side, and 2 off-set switches on the right.  The 2 switches on the right will require trimming of the under-side for clearance of wiring.  If you choose 4 or less switches, they will all be on the left side of the panel.  If you choose to do a 5 or 6 switch setup, we will make you a panel as you see above.  Just be prepared to do some minor trimming to run wires to the 2 switches on the right. We also suggest removing the small heat shield under the lid.

Optional Lettering Color (approximate color):

These will mount with 3M double-sided automotive emblem adhesive tape.

NOTES:

We will only use the 3 types of switches seen in the photos.  If you want a modification of this design, email us.

We will not provide any wiring or instructions other than what is on this page - just the switches.

Important notes:

On / Off switches are for things like cooling fans, nitrous arming, line locks, bottle warmers. Wiring instructions here.

Momentary switches are used for things you only want to happen for an instant, such as nitrous purging.

3-Position switches are used for variable speed cooling fans.  It will be up to you to supply the proper relay.  This switch is a 3-pin switch.

Cutout Switches / Bottle Opener Switches are used for operating cutouts and bottle openers, or anyting else that has a 2-way motor.  These are 6-pin switches that are momentary in both up and down positions, meaning the moment you let go of up or down, they snap back into the off position.

Switch 1 Style
*
Switch 1 Label
Switch 2 Style
*
Switch 2 Label
Switch 3 Style
Switch 3 Label
Switch 4 Style
Switch 4 Label
Switch 5 Style
Switch 5 Label
Switch 6 Style
Switch 6 Label
Lettering/Labeling Color
Quantity
add to cart buy now
Customer Reviews
There are no reviews yet. create your own review